Show Ip Igmp Groups - NETGEAR ProSafe GSM7224P User Manual

Term Definition
IGMP Admin
The administrative status of IGMP. This is a configured value.
Mode
Interface
Valid slot and port number separated by forward slashes.
Interface-Mode
Indicates whether IGMP is enabled or disabled on the interface. This is a configured
value.
Operational-Sta
The current state of IGMP on this interface. Possible values are Operational or
tus
Non-Operational.

show ip igmp groups

This command displays the registered multicast groups on the interface. If [detail] is
specified this command displays the registered multicast groups on the interface in detail.
Format
show ip igmp groups <unit/slot/port> [detail]
Mode
Privileged EXEC
If you do not use the detail keyword, the following fields appear:
Term Definition
IP Address
The IP address of the interface participating in the multicast group.
Subnet Mask
The subnet mask of the interface participating in the multicast group.
Interface Mode
This displays whether IGMP is enabled or disabled on this interface.
The following fields are not displayed if the interface is not enabled:
Term Definition
Querier Status
This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
Groups
The list of multicast groups that are registered on this interface.
If you use the detail keyword, the following fields appear:
Term Definition
Multicast IP
The IP address of the registered multicast group on this interface.
Address
Last Reporter
The IP address of the source of the last membership report received for the specified
multicast group address on this interface.
Up Time
The time elapsed since the entry was created for the specified multicast group address
on this interface.
Expiry Time
The amount of time remaining to remove this entry before it is aged out.
ProSafe Managed Switch
IP Multicast Commands
344