Internet Group Message Protocol (Igmp) Commands; Ip Igmp; Ip Igmp Version - NETGEAR ProSafe GSM7224P User Manual

RP Address 192.168.20.1
Group Address 229.2.0.0
Group Mask 255.255.0.0
Origin Static
Expiry Time (hh:mm:ss) NA

Internet Group Message Protocol (IGMP) Commands

This section describes the commands you use to view and configure IGMP settings.

ip igmp

This command sets the administrative mode of IGMP in the system to active.
Default
disabled
Format
ip igmp
Modes
• Global Config
• Interface Config
no ip igmp
This command sets the administrative mode of IGMP in the system to inactive.
Format
no ip igmp
Modes
• Global Config
• Interface Config

ip igmp version

This command configures the version of IGMP for an interface. The value for <version> is
either 1, 2 or 3.
Default
3
Format
ip igmp version <version>
Modes
Interface Config
no ip igmp version
This command resets the version of IGMP to the default value
Format
no ip igmp version
Modes
Interface Config
ProSafe Managed Switch
IP Multicast Commands
340
.