Dhcp Snooping Configuration Commands; Show Dhcp Client Vendor-Id-Option; Ip Dhcp Snooping Vlan - NETGEAR ProSafe GSM7224P User Manual

show dhcp client vendor-id-option

Use this command to display the configured administration mode of the vendor-id-option and
the vendor-id string to be included in Option-43 in DHCP requests.
Format
show dhcp client vendor-id-option
Mode
Privileged EXEC
Example: The following shows example CLI display output for the command.
(switch) #show dhcp client vendor-id-option
DHCP Client Vendor Identifier Option ........... Enabled
DHCP Client Vendor Identifier Option string .... Client.

DHCP Snooping Configuration Commands

This section describes commands you use to configure DHCP Snooping.
ip dhcp snooping
Use this command to enable DHCP Snooping globally.
Default
disabled
Format
ip dhcp snooping
Mode
Global Config
no ip dhcp snooping
Use this command to disable DHCP Snooping globally.
Format
no ip dhcp snooping
Mode
Global Config

ip dhcp snooping vlan

Use this command to enable DHCP Snooping on a list of comma-separated VLAN ranges.
Default
disabled
Format
ip dhcp snooping vlan <vlan-list>
Mode
Global Config
ProSafe Managed Switch
Switching Commands
145