Dot1X Port-Control; Dot1X Port-Control All - NETGEAR ProSafe GSM7224P User Manual

no dot1x max-users
This command resets the maximum number of clients allowed per port to its default value.
Format
no dot1x max-req
Mode
Interface Config

dot1x port-control

This command sets the authentication mode to use on the specified port. Select
force-unauthorized to specify that the authenticator PAE unconditionally sets the
controlled port to unauthorized. Select force-authorized to specify that the authenticator
PAE unconditionally sets the controlled port to authorized. Select auto to specify that the
authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator and the authentication server. If the
option is specified, then MAC-based dot1x authentication is enabled on the port.
mac-based
Default
auto
Format
dot1x port-control {force-unauthorized | force-authorized | auto |
mac-based}
Mode
Interface Config
no dot1x port-control
This command sets the 802.1x port control mode on the specified port to the default value.
Format
no dot1x port-control
Mode
Interface Config

dot1x port-control all

This command sets the authentication mode to use on all ports. Select
force-unauthorized to specify that the authenticator PAE unconditionally sets the
controlled port to unauthorized. Select force-authorized to specify that the authenticator
PAE unconditionally sets the controlled port to authorized. Select auto to specify that the
authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator and the authentication server. If the
option is specified, then MAC-based dot1x authentication is enabled on the port.
mac-based
Default
auto
Format
dot1x port-control all {force-unauthorized | force-authorized | auto
| mac-based}
Mode
Global Config
ProSafe Managed Switch
Switching Commands
94