Icmp Throttling Commands; Ip Unreachables; Ip Redirects - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Bad Routes
The number of routes contained in valid RIP packets that were ignored for any reason.
Received
Updates Sent
The number of triggered RIP updates actually sent on this interface.

ICMP Throttling Commands

This section describes the commands you use to configure options for the transmission of
various types of ICMP messages.

ip unreachables

Use this command to enable the generation of ICMP Destination Unreachable messages. By
default, the generation of ICMP Destination Unreachable messages is enabled.
Default
enable
Format
ip unreachables
Mode
Interface Config
no ip unreachables
Use this command to prevent the generation of ICMP Destination Unreachable messages.
Format
no ip unreachables
Mode
Interface Config

ip redirects

Use this command to enable the generation of ICMP Redirect messages by the router. By
default, the generation of ICMP Redirect messages is disabled.
Default
disabled
Format
ip redirects
Mode
• Global Config
• Interface Config
no ip redirects
Use this command to prevent the generation of ICMP Redirect messages by the router.
Format
no ip redirects
Mode
• Global Config
• Interface Config
ProSafe Managed Switch
Routing Commands
316