Show Ip Ospf Interface Brief - NETGEAR ProSafe GSM7224P User Manual

The information below will only be displayed if OSPF is enabled.
Term Definition
OSPF Interface
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The
Type
OSPF Interface Type will be 'broadcast'.
State
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router.
Designated
The router ID representing the designated router.
Router
Backup
The router ID representing the backup designated router.
Designated
Router
Number of Link
The number of link events.
Events
Local Link LSAs
The number of Link Local Opaque LSAs in the link-state database.
Local Link LSA
The sum of LS Checksums of Link Local Opaque LSAs in the link-state database.
Checksum

show ip ospf interface brief

This command displays brief information for the IFO object or virtual interface tables.
Format
show ip ospf interface brief
Mode
• Privileged EXEC
• User EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
OSPF Admin
States whether OSPF is enabled or disabled on a router interface.
Mode
OSPF Area ID
The OSPF Area Id for the specified interface.
Router Priority
A number representing the OSPF Priority for the specified interface.
Hello Interval
A number representing the OSPF Hello Interval for the specified interface.
Dead Interval
A number representing the OSPF Dead Interval for the specified interface.
Retransmit
A number representing the OSPF Retransmit Interval for the specified interface.
Interval
Retransmit
A number representing the OSPF Transit Delay for the specified interface.
Delay Interval
LSA Ack
A number representing the OSPF LSA Acknowledgment Interval for the specified
Interval
interface.
ProSafe Managed Switch
Routing Commands
298