Generic Gnome Policy - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

The settings you configure on this page determine when the policy is applied to devices.
See Section 15.3, "Schedules," on page 128
their options.
14 Click Next to display the Policy Groups page.
15 (Optional) Click Add to open the Select Groups dialog box, then click the underlined links in
the Name column to select the desired policy groups and display their names in the Selected list
box.
Using policy groups eases administration efforts by letting you group several policies so you
can use common assignments, schedules, and so forth, rather than configuring these settings for
each policy you create. For more information, see
page 185.
16 Click Next to display the Finish page.
17 Review the information on the Finish page, making any changes to the policy settings by using
the Back button as necessary. Click Finish to create the policy as configured according to the
settings on the Finish page.

16.4 Generic GNOME Policy

The Generic GNOME policy is used to configure GConf- based applications on a device.
To configure the GNOME policy:
1 In the ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Create New Policy page.
3 In the Policy Type list, click Generic GNOME Policy, then click Next to display the Policy
Name page.
for information about the available schedules and
Section 17.3, "Creating Policy Groups," on
Creating Policies 151