Alarm History Clear Command; Alarm Xedit Command; Figure 153 Alarm History Show Command Example; Figure 154 Alarm History Clear Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
The following example displays the historic critical level alarms for all alarm categories, and
all conditions.

Figure 153 Alarm History Show Command Example

ras> alarm history show critical all all all all rev detail
no alarm
------ ------
1 eqpt
2 eqpt
3 eqpt

46.9 Alarm History Clear Command

Syntax:
ras> alarm history clear [<alarm>|all <condition>|all] <severity>
This command removes historic alarm entries by alarm category, alarm condition or severity.
The following example removes the historic minor level alarms for all alarm categories, and
all conditions.

Figure 154 Alarm History Clear Command Example

ras> alarm history clear minor

46.10 Alarm XEdit Command

Syntax:
ras> alarm xedit <alarm>|all <cond>|<condcode> <severity> <fac>
<target>[,<target>] [clearable]
where
<cond>
<condcode >
302
condition
------------------------ -------- -------------- -------
+fan_err
* IES-1248:Fan 2 speed 0, low 2000, high 8000
+fan_err
* IES-1248:Fan 3 speed 0, low 2000, high 8000
+fan_err
* IES-1248:Fan 1 speed 0, low 2000, high 8000
=
all|condition
under which the alarm applies. Use the
find alarm conditions.
The condition code is the number of a specific alarm message.
=
Use the
alarm tablelist
severity timestamp
critical 07/28 15:23:35 eqpt
critical 07/28 15:23:35 eqpt
critical 07/28 15:23:33 eqpt
This is the text description for the condition
alarm tablelist
to find alarm condition codes.
Chapter 46 Alarm Commands
source
to