Rpvc Arp Show Command; Rpvc Arp Flush Command; Pppoa To Pppoe (Pae) Commands; Pae Pvc Delete Command - ZyXEL Communications IES-1248-51 User Manual

56.7.13 RPVC ARP Show Command

Syntax:
ras> adsl rpvc arp show
This command
gateways in the Address Resolution Protocol table.
The following is an example.

Figure 293 RPVC ARP Agingtime Show Command Example

ras> adsl rpvc arp show
gateway ip
---------------
192.168.10.102

56.7.14 RPVC ARP Flush Command

Syntax:
ras> adsl rpvc arp flush
This command
Resolution Protocol table.

56.8 PPPoA to PPPoE (PAE) Commands

You can use these commands to create PVCs for PAE translation.

56.8.1 PAE PVC Delete Command

Syntax:
ras> adsl paepvc delete <portlist> <vpi> <vci>
where
<portlist>
<vpi>
<vci>
This command removes a PAE PVC.
Chapter 56 Virtual Channel Management
displays how long the device stores the IP addresses of 2684 routed mode
vid mac
---- -----------------
1 00:0d:9d:d9:43:3b
clears the IP addresses of 2684 routed mode gateways from the Address
The port number of the PAE PVC. You can specify a single
=
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
The VPI of the PAE PVC.
=
The VCI of the PAE PVC.
=
IES-1248-51/51A/53 User's Guide
417