ZyXEL Communications IES-1248-51 User Manual page 279

Table 92 Commands (continued)
CLASS COMMAND
switch
igmpsnoop show
igmpsnoop enable
igmpsnoop disable
igmpsnoop bandwidth
default
igmpsnoop bandwidth
delete
igmpsnoop bandwidth
port disable
igmpsnoop bandwidth
port enable
igmpsnoop bandwidth
port set
igmpsnoop bandwidth
port show
igmpsnoop bandwidth
set
igmpsnoop bandwidth
show
igmpsnoop igmpcount
disable
igmpsnoop igmpcount
enable
igmpsnoop igmpcount
set
igmpsnoop igmpcount
show
igmpsnoop mvlan set <vid>
igmpsnoop mvlan
show
igmpsnoop mvlan
disable
Chapter 44 Commands
PARAMETERS
<proxy|snooping>
<bandwidth>
<index>
<portlist>
<portlist>
<portlist>
<bandwidth>
<portlist>
<index> <start-
mcast-ip> <end-
mcast-ip>
<bandwidth>
<portlist>
<portlist>
<portlist> <count>
[portlist]
<portlist>:<F<T|U>
|X|N> [<portlist>:
<F<T|U>|X|N> ...]
[name]
<vlanlist>
<vid>
IES-1248-51/51A/53 User's Guide
DESCRIPTION
Displays the IGMP snooping
setting.
Sets IGMP snooping mode.
Turns off IGMP snooping.
Delete an entry of bandwidth
budget setting specified in <index>
field.
Disable bandwidth budget control
for a port
Enable bandwidth budget control
for a port
Set bandwidth threshold for a port
<bandwidth>: 1..100,000, in unit of
kbps
Show bandwidth control setting for
a port
Set bandwidth budget for a range
of multicast IP channels specified
in <index> field.
<index>: ?
<start-mcast-ip>: <ip>, start
multicast IP address
<end-mcast-ip>: <ip>, end
multicast IP address
Show bandwidth budget for a
range of multicast IP channels
Disable IGMP count limiting to
subscriber port
Enable IGMP count limiting to
subscriber port
Set IGMP count limiting number to
subscriber port
Display IGMP count limiting setting
status on the specified slot
Configures a MVLAN entry.
(Same as VLAN command)
Show multicast vlans,
Include group information
Turns off a MVLAN entry.
P
M/L
H/H
H/H
M/H
M/H
M/H
L/H
M/H
L/L
M/H
L/L
H/H
H/H
H/H
M/L
H/H
M/L
H/H
279