IES-1248-51/51A/53 User's Guide
Figure 193 IGMP Count Set Command Example
ras> switch igmpsnoop igmpcount set 4 2
50.6.4 IGMP Count Show Command
Syntax:
ras> switch igmpsnoop igmpcount show [portlist]
where
[portlist]
This command displays the IGMP count limit setting status for the specified ADSL port(s).
The following example displays the IGMP count limit settings for ports 1-5.
Figure 194 IGMP Count Show Command Example
ras> switch igmpsnoop igmpcount show 1~5
port enable count
---- ------ -----
1
-
2
-
3
-
4
-
5
-
50.7 IGMP Snoop Statistics Commands
Use the IGMP Snoop Statistics commands to display current IGMP settings and statistics.
50.7.1 IGMP Snoop Info Statistics Command
Syntax:
ras> statistics igmpsnoop info [clear]
This command displays the current IGMP settings and the number of IGMP-related packets
received. The following figure shows an example.
336
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
5
5
5
5
5
Chapter 50 IGMP Commands