Pae Pvc Show Command; Pae Pvc Session Command; Figure 295 Pae Pvc Show Command Example - ZyXEL Communications IES-1248-51 User Manual

56.8.3 PAE PVC Show Command

Syntax:
ras> adsl paepvc show <portlist> [<vpi> <vci>]
where
<portlist>
<vpi>
<vci>
This command displays the PPPoA-to-PPPoE PVC settings for the specified port(s) or PVCs.
The following example displays the settings for port 1.

Figure 295 PAE PVC Show Command Example

ras> adsl paepvc show 1
port vpi
---- --- ----- ---- --- ----- -----------------------------------
1 1

56.8.4 PAE PVC Session Command

Syntax:
ras> adsl paepvc session <portlist> [<vpi> <vci>]
where
<portlist>
<vpi>
<vci>
This command displays the status of PPPoA-to-PPPoE PVC sessions on the specified port(s)
or PVCs.
The following example displays the settings for port 1.
Chapter 56 Virtual Channel Management
The port number of the PAE PVC. You can specify a single
=
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
The VPI of the PAE PVC.
=
The VCI of the PAE PVC.
=
vci pvid pri htime US/DS vcprofile/acname/srvcname
33 1 0 10 dsprofile: DEFVAL
usprofile:
acname
srvcname : video
The port number of the PAE PVC. You can specify a single
=
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
The VPI of the PAE PVC.
=
The VCI of the PAE PVC.
=
IES-1248-51/51A/53 User's Guide
: vom
419