Using Command History; Saving Your Configuration; Logging Out; Command Summary - ZyXEL Communications ES-2024A User Manual

27.7 Using Command History

The switch keeps a list of up to 256 commands(s) you have entered for the current CLI
session. You can use any commands in the history again by pressing the up ( ) or down ( )
arrow key to scroll through the previously used commands and press
command to display the list of commands.

Figure 97 CLI: History Command Example

ras> history
enable
exit
show ip
history
ras>

27.8 Saving Your Configuration

After you set the switch settings with the configuration commands, use the
command to save the changes permanently.

Figure 98 CLI: write memory

ras# write memory
Note: The
You must save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the switch.

27.8.1 Logging Out

In User mode, enter the

27.9 Command Summary

The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User's Guide for more background
information.
Chapter 27 Introducing the Commands
command is not available in User mode.
write memory
or
exit logout
command to log out of the CLI.
ES-2024A User's Guide
. Use the history
[ENTER]
write memory
151