1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Network Router
  5. IES-5106M
  6. User manual

ZyXEL Communications IES-5106M User Manual

Integrated ethernet switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

IES-5106M / IES-5112M /
IES-6000M
Integrated Ethernet Switch
Default Login Details
IP Address
http://192.168.1.1
User Name
Password
Version 1.00
www.zyxel.com
Edition 2, 03/2011
www.zyxel.com
admin
1234
Copyright © 2011
ZyXEL Communications Corporation

Advertisement

Table of Contents
loading

Related Manuals for ZyXEL Communications IES-5106M

Summary of Contents for ZyXEL Communications IES-5106M

  • Page 1 IES-5106M / IES-5112M / IES-6000M Integrated Ethernet Switch Default Login Details IP Address http://192.168.1.1 User Name admin Password 1234 Version 1.00 www.zyxel.com Edition 2, 03/2011 www.zyxel.com Copyright © 2011 ZyXEL Communications Corporation...

  • Page 3: About This User's Guide

    • Supporting Disk Refer to the included CD for support documents. Documentation Feedback Send your comments, questions or suggestions to: techwriters@zyxel.com.tw Thank you! Need More Help? More help is available at www.zyxel.com. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 4 • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 5: Document Conventions

    Naming Conventions • The IES-5106M main chassis may be referred to as the “IES-5106M” or the “main chassis”. • The IES-5112M main chassis may be referred to as the “IES-5112M” or the “main chassis”.
  • Page 6 Icons Used in Figures Figures in this User’s Guide may use the following generic icons. The IES icon is not an exact representation of your device. Computer Notebook computer Server Telephone Switch Router IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 7: Safety Warnings

    INSTRUCTIONS. Dispose them at the applicable collection point for the recycling of electrical and electronic equipment. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 8 Be careful not to put fingers or objects inside the fan module. • Energy Hazard Warning! Remove all metal jewelry, watches, and so on from your hands and wrists before serving this device. This product is recyclable. Dispose of it properly. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 9: Contents Overview

    Introduction ..........................19 System Introduction ........................21 Installation and Connections ....................25 Hardware Installation and Connections ..................27 Maintenance and Troubleshooting ..................57 Maintenance ..........................59 Hardware Troubleshooting ......................65 Appendices and Index ......................69 IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 10 Contents Overview IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 11: Table Of Contents

    2.4.3 IES-5106M/IES-5112M VoIP Line Card Telco-50 Connections ........39 2.4.4 IES-5106M/IES-5112M Splitter Chassis Rear Panel Connections (DSL) ....40 2.4.5 IES-5106M / IES-5112M Splitter Chassis Rear Panel Connections (VoIP) ....40 2.5 IES-6000M Card Connections ..................... 41 2.5.1 IES-6000M VoIP Line Card Telco-50 Connections ............ 43 2.5.2 IES-6000M Splitter Chassis Rear Panel Connections (DSL) ........
  • Page 12 Maintenance ..........................67 4.1 Fan Maintenance ......................... 67 4.1.1 Procedure to Remove and Install the IES-5106M/IES-5112M Fan Module ....67 4.1.2 Procedure to Remove and Install the IES-6000M Fan Module ........69 4.1.3 Procedure to Remove and Install the IES-6000M Filters ........... 71 4.2 Power Maintenance ......................

  • Page 13: System Introduction

    The IES platform allows for convenient management and support of various technologies. The IES-5106M can hold a maximum of five line cards, so up to 240 subscribers (360 when using the ALC1272 72-port line card) can simultaneously utilize a wide range of powerful broadband services.

  • Page 14: Applications

    The MDF is the point of termination for the outside telephone company lines coming into a building and the telephone wiring in the building. Note that ADSL service can co-exist with voice service on the same line. Figure 1 Application: Multi-tenant Unit (MTU) IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 15: Central Office Application

    1.2.2 Central Office Application The IES provides DSL and voice service over telephone wires to subscribers. The following figure shows the IES setup in a telephone company’s central office. Figure 2 Application: Central Office IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 16: Front Panel

    Chapter 1 System Introduction 1.3 Front Panel The following figures show the main chassis front panels with cards installed. Figure 3 IES-5106M Front Panel Figure 4 IES-5112M Front Panel IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 17 Chapter 1 System Introduction Figure 5 IES-6000M Front Panel IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 18 Chapter 1 System Introduction IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 19: Hardware Installation And Connections

    2.2.1 Rack-mounted Installation Requirements Make sure the rack will safely support the combined weight of all the equipment it contains. • Use a #2 Phillips screwdriver to install the screws. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 20: Chapter 2 Hardware Installation And Connections

    Make sure that nothing obstructs the airflow of the main chassis. • If you are facing the IES-5106M or IES-5112M front panel, the fan exhaust vents are located on the right side panel of the unit and the fans along with the intake vents are located on the left side panel.
  • Page 21 Note: Install the main chassis and splitter chassis in a rack with the splitter chassis directly below the main chassis. Note: For the IES-5106M, If you are using 72-port line cards, use two IES-5005ST splitter chassis. If you are using 48-port line cards, use one IES-5005ST splitter chassis and one IES-5002ST splitter chassis.
  • Page 22 Chapter 2 Hardware Installation and Connections Repeat steps to attach the second mounting bracket on the other side of the main chassis. Figure 9 Attaching Mounting Brackets to the IES-5106M Figure 10 Attaching Mounting Brackets to the IES-5112M IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 23: Connecting The Ies-5106M/Ies-5112M Frame Ground

    Refer to Chapter 5 on page 75 for the ground wire gauge. • The IES-5106M/IES-5112M frame ground is on the upper right corner of the front panel. • The IES-5005ST, IES-5000ST or IES-5002ST frame ground is near the lower left of the rear panel.
  • Page 24 Chapter 2 Hardware Installation and Connections Figure 12 IES-5106M/IES-5112M Frame Ground Figure 13 IES-5005ST Splitter Chassis Frame Ground Figure 14 IES-5000ST Splitter Chassis Frame Ground IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 25: Installation And Connections

    • Connect the frame grounds to a building’s protective earthing terminals using a green-and-yellow frame ground wire. Warning! Connect the frame ground before you connect any other cables or wiring. Figure 16 IES-6000M Frame Ground IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 26: Card Installation

    Slide the card into the slot until it makes contact with the backplane. The ejector levers should be at a small angle to the front panel now. Push the two ejector levers firmly until they are flush with the front panel. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 27 Make sure the front panel of the MSC is touching the front panel of the chassis. The MSC must be installed properly in order for you to be able to tighten the thumbscrews. Tighten the two thumbscrews. Figure 18 Installing a Card IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 28 Chapter 2 Hardware Installation and Connections Figure 19 Closing the Ejector Levers Figure 20 Tightening Card Thumbscrews IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 29: Removing Msc And Line Cards

    Grasp the center of the front panel of the card with one hand and place the other hand under the card to support it. Slide the card out of the slot. Figure 21 Loosening Card Thumbscrews IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 30 Chapter 2 Hardware Installation and Connections Figure 22 Opening the Ejector Levers Figure 23 Removing a Main Chassis Card IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 31: Installing A Splitter Chassis Card

    Insert the card into the slot and push it in until the front panel of the card is flush with the front panel of the splitter chassis. Tighten the two thumbscrews. Figure 24 Installing a Splitter Chassis Card IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 32: Removing A Splitter Chassis Card

    Grasp the handles on the front panel of the card and start to pull the card out. After you have the card partially out of the splitter chassis, place one hand under the card to support it. Slide the card out of the slot. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 33: Ies-5106M/Ies-5112M Card Connections

    Use a Telco-50 cable to connect the line card’s front panel Telco-50 connector to the corresponding splitter card’s front panel Telco-50 connector. Make sure that you use the appropriate length Telco-50 cables with the line cards; using cables of IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 34 IES-5106M) or IES-5000ST (for IES-5112M) splitter card chassis in conjunction with an IES-5002ST splitter card chassis, as shown in the following figures. Figure 28 IES-5106M Front Panel Telco-50 Connections (with 5 Line Cards) IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 35: Ies-5106M/Ies-5112M 72-Port Line Card Connections

    2.4.2 IES-5106M/IES-5112M 72-port Line Card Connections When using 72-port line cards (such as the ALC1272G) use two IES-5005ST (for IES-5106M) or two IES-5000ST (for IES-5112M) splitter card chassis as shown in the following figures. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 36 Chapter 2 Hardware Installation and Connections Figure 30 IES-5106M Front Panel Telco-50 Connections (with 72-port Line Cards) IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 37 75 Note: These cables are different in length from the “long” and “short” cables used with the other line cards. See the appendix on product specifications for details. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 38 Use a short Telco-50 cable to connect a 72-port line card’s 49~72 Telco-50 connector to the Telco-50 connector on the corresponding splitter card. 2.4.2.1 IES-5106M 72-port Line Card to Splitter Card Connections Connect the line card ports to the splitter or extension card ports as described in the following table, which represents the IES’s front panel.

  • Page 39: Ies-5106M/Ies-5112M Voip Line Card Telco-50 Connections

    VoIP card and its extension cards in the chassis directly adjacent to the DSL card and its splitter cards, as shown in the following figure (this example uses the ALC line card and ASC1024 splitter). IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 40: Ies-5106M/Ies-5112M Splitter Chassis Rear Panel Connections (Dsl)

    Main Distribution Frame (MDF). Section 2.6.4 on page 48 for example splitter chassis rear panel connections. 2.4.5 IES-5106M / IES-5112M Splitter Chassis Rear Panel Connections (VoIP) When using the VoIP line card in conjunction with an ADSL or VDSL card and its associated splitter card(s), connect the VoIP line card’s extension card(s) and the...

  • Page 41: Ies-6000M Card Connections

    • Use a long Telco-50 cable to connect a line card’s 1-24 Telco-50 connector to the Telco-50 connector on the corresponding splitter or extension card. Follow these directions if there are two splitter chassis below the IES-6000M main chassis. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 42 • Use a long Telco-50 cable to connect a line card’s 1-24 Telco-50 connector to the Telco-50 connector on the corresponding splitter card of the lower splitter chassis. Figure 34 IES-6000 Front Panel Telco-50 Connections (2 Splitter Chassis) IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 43: Ies-6000M Voip Line Card Telco-50 Connections

    VoIP card and its extension cards in the chassis directly adjacent to the DSL card and its splitter cards, as shown in the following figure (this example uses the ALC line card and ASC1024 splitter). IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 44 Use a Telco-50 cable to connect the SEC1024’s USER Telco-50 connector on the rear of the splitter chassis to the CO Telco-50 connector on the rear of an ADSL or VDSL splitter card. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 45: Ies-6000M Splitter Chassis Rear Panel Connections (Dsl)

    VoIP line card’s extension card(s) and the DSL splitter card(s) as follows. Chapter Note: Use 180-degree Telco-50 cables for VoIP rear panel connections (see 5 on page 75 for information on 180-degree Telco-50 cable length). IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 46 When you do not use the VoIP line card in conjunction with a DSL splitter card, connect the USER Telco-50 connectors to the subscribers’ telephone wiring. In most multi-tenant unit applications, the USER pins connect to the subscribers’ telephone wiring via a Main Distribution Frame (MDF). IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 47: Mdf Connections

    • Some MDFs have surge protection circuitry built in between the two banks; thus, do not connect telephone wires from the telephone company directly to your IES. • Use a punch-down tool to seat telephone lines into MDF blocks. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 48: Telco-50 Cables

    2.6.4 MDF Connection Scenarios The following figure gives an overview of possible scenarios for the IES using the line cards and splitter cards. Data and voice signals can coexist on the same telephone wiring. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 49 You may connect using an MDF or attach RJ-11 connectors to the non-IES end of the Telco-50 cable and then connect to DSL modems directly. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 50: Installation Scenario B

    MDF. 2.6.4.2 Installation Scenario B Phone service is available. There is one MDF from which end-users CO connections are made (see next figure). This installation scenario does not apply to G.SHDSL connections. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 51 • MDF 2 is used for telephone connections only. • MDF 3 is for DSL service connections. Note: Change the wiring from MDF 1 to MDF 3 for telephone subscribers who want DSL service. Figure 42 Installation Scenario B IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 52: Installation Scenario C

    CO telephone wiring connections (see the following figure). This installation scenario does not apply to G.SHDSL connections. Note: Users A and B have telephone (only) service. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 53 • MDFs 1 and 2 are the two original MDFs. • MDFs 3 and 4 are two additional MDFs you need. Note: User A still has telephone service only. User B now has telephone and DSL service (see the following figure) IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 54 Connect the Telco-50 connector end of the cable you want for phone service to the Telco-50 connector labeled CO on the splitter chassis rear panel. Connect the wiring on the other side of the Telco-50 cable to the lower ports of MDF 4 using a punch-down tool. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 55: Voip Connection Scenarios

    In this installation scenario, you use a VoIP line card, an SEC1024 extension card and an MDF to provide voice service over the Internet to your subscribers. Figure 45 VoIP Connection Scenario A Use the following procedure for this installation scenario. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 56 Section 2.5.3 on page 45 for more information on using the VOP1248G in conjunction with DSL line cards. This installation scenario does not apply to G.SHDSL connections. Figure 46 VoIP Connection Scenario B IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 57: Alarm Module

    The front of the alarm module should be well inside the front panel. Use a screwdriver to tighten the alarm module screws. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 58: Removing The Alarm Module

    Use the following procedure to remove the alarm module from the main chassis. Use a screwdriver to loosen the alarm module screws. Grasp the handle on the front of the alarm module, and pull the alarm module out. Figure 48 Removing the Alarm Module IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 59: Alarm Connections

    Observe the following before you start: • Refer to Chapter 5 on page 75 for the gauge of wire to use for the IES power connections. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 60: Power Modules

    Connect the other ends of the power wires to the ground terminal on the power supply. Push the power module back in and tighten the screws. Repeat the previous steps for the second power supply module. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 61: Dressing The Power Wires And Alarm Cable

    Figure 51 Connecting the Power Wires to the IES Power Module 2.9 Dressing the Power Wires and Alarm Cable Use a cable tie to dress the power wires and the alarm cable after you connect them. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 62: Procedure To Turn On The Ies Power

    Figure 52 Dressing the IES-6000M Power Wires and Alarm Cable 2.9.1 Procedure to Turn on the IES Power Turn on the power supply. Move the power switches on both power modules to the ON position. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 63: Hardware Troubleshooting

    If the fans are not working properly, refer to Section 4.1 on page 67 for instructions on changing a fuse or changing the fan module. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 64: No Voice On An Adsl Connection

    Letters in the figure shown next indicate the systematic tests to be done. Suppose you’re using installation scenario “B” as shown in the chapter on MDF connections. The logic for other scenarios should be similar. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 65 Connect a telephone to the upper port of MDF 2. If there is no dial tone, then the problem is between MDF 1 and MDF 2. Check the telephone wire and connections between MDFs 1 and 2. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 66 Disconnect the DSL modem from the wall jack and connect the telephone to the wall jack. If there is no dial tone, then there is a problem with the building wiring between the DSL subscriber’s home and the MDF. Contact your telephone company for troubleshooting. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 67: Maintenance

    4.1 Fan Maintenance This section describes how to change a fan fuse or a fan module on the IES. 4.1.1 Procedure to Remove and Install the IES-5106M/IES- 5112M Fan Module The IES main chassis has a hot-swappable fan module. The fan module is at the left on the front panel.
  • Page 68 Chapter 4 Maintenance Figure 54 Loosening the IES-5106M/IES-5112M Fan Module Thumbscrews Figure 55 Removing the IES-5106M/IES-5112M Fan Module IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 69: Procedure To Remove And Install The Ies-6000M Fan Module

    Chapter 4 Maintenance Figure 56 IES-5106M/IES-5112M Fan Module (Location of Fuse Indicated) 4.1.2 Procedure to Remove and Install the IES-6000M Fan Module The IES main chassis has a hot-swappable fan module. The IES-6000M fan module is located above the slots and below the power modules on the front panel.
  • Page 70 Chapter 4 Maintenance Figure 57 Loosening the IES-6000M Fan Module Thumbscrews Figure 58 Removing the IES-6000M Fan Module Figure 59 IES-6000M Fan Module (Location of Fuse Indicated) IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 71: Procedure To Remove And Install The Ies-6000M Filters

    To clean or replace a filter on the side panel, you have to remove the one at the bottom of the front panel first. Then, slide out the filter along the side panel, and clean or replace it as necessary. Figure 60 Loosening the IES-6000M Air Filter Thumbscrews IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 72: Power Maintenance

    Make sure that the power module you want to disconnect has the power switch in the OFF position. Turn off the power supply. Disconnect the power wires from the power supply’s power terminals. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 73: Procedure To Change A Power Module

    Slide the IES power module back into the power module slot. Tighten the thumbscrews. Refer to Section 4.2.3 on page 74 to reconnect the power after you finish. Figure 62 Sliding Out the IES Power Module IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 74: Procedure To Reconnect The Power

    Figure 63 Connecting the Power Wires to the IES Power Module 4.2.3 Procedure to Reconnect the Power Reconnect the power wires to the power supply terminals. Turn the power supply back on. Turn the IES power module switch back to the ON position. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 75: Product Specifications

    The flexible design of the IES allows service providers to start with Future Expansion minimum cost. As the number of users and applications increases, additional line cards can be added to support more subscribers. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 76: System Specifications

    This section provides the specifications for the IES. Table 7 System Specifications Main chassis IES-5106M: 440 mm (W) x 249.75 mm (D) x 214.52 mm (H); 5U dimensions IES-5112M: 440 mm (W) x 249.4 mm (D) x 362.22 mm (H); 8.2U (excluding fan IES-6000M: 440 mm (W) x 280 mm (D) x 484 mm (H);...
  • Page 77 Power wire: 6 AWG or larger (two pairs of wires are required to support full power) Power consumption IES-5106M: 936 Watts; 26 Amps; -36 to -72 Volts DC, no tolerance (Max) IES-5112M: 1260 Watts; 35 Amps; -36 to -72 Volts DC, no tolerance IES-6000M: 2160 Watts;...
  • Page 78 (D) x 25.4 mm (H) and 90 mm (W) x 90 mm (D) x 25.4 mm (H) Fan fuse ratings IES-5106M: Number of fuses: 1; Type: T; Amps: 1; Volts AC: 250; Dimensions: 5 mm (D) x 20 mm (L) IES-5112M: Number of fuses: 1;...
  • Page 79 RoHS Compliance CE Conformity ITU-T K.20 Safety: EN 60950-1 CSA 60950-1 UL 60950-1 IEC 60950-1 EMC: FCC Part 15 Class A EN55022 Class A EN55024 Class A ETSI 300-386 Complies with ETSI 300-019 IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 80 Chapter 5 Product Specifications IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 81: Appendix A Legal Information

    ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein.
  • Page 82 Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASS 1 PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11. PRODUIT CONFORME SELON 21 CFR 1040.10 ET 1040.11. IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 83: Zyxel Limited Warranty

    To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the device at http:// www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com. IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 84 Appendix A Legal Information IES-5106M / IES-5112M / IES-6000M User’s Guide...

  • Page 85: Index

    67, 69, 71 main. See main chassis. line cards splitter. See splitter chassis. management switch card connections rack alarm splitter cards line cards to splitter cards power copyright critical alarm line card connections 33, 35 IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 86 Telco-50 connections Telco-50 cables 41, 48 power module telephone wire changing connections connecting cable disconnecting gauge power wire trademarks dressing troubleshooting product description product registration PWR LED VOP card 39, 43 rack installation IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 87 Index warranty note wire power IES-5106M / IES-5112M / IES-6000M User’s Guide...
  • Page 88 Index IES-5106M / IES-5112M / IES-6000M User’s Guide...

This manual is also suitable for:

Ies-5112mIes-6000m

Table of Contents