ZyXEL Communications IES-1248-51 User Manual page 281

Table 92 Commands (continued)
CLASS COMMAND
rstp port disable
rstp port priority
rstp port pathcost
dhcprelay show
dhcprelay enable
dhcprelay disable
dhcprelay server
set
dhcprelay server
delete
dhcprelay server
active
dhcprelay relaymode <mode>
dhcprelay option82
enable
dhcprelay option82
disable
dhcprelay option82
set
dhcprelay opt82sub2
enable
dhcprelay opt82sub2
disable
dhcprelay opt82sub2
set
acl profile delete
Chapter 44 Commands
PARAMETERS
<portlist>
<portlist>
<priority>
<portlist>
<pathcost>
<vid> <primary-
server>
[<secondary-
server>]
<vid> [<primary-
server>]
<vid> <active-
server>
<relay info>
<relay info>
<name>
IES-1248-51/51A/53 User's Guide
DESCRIPTION
Set enet port to disable rstp.
Set enet port's rstp priority.
Set enet port's rstp pathcost.
Displays DHCP relay settings.
Turns on DHCP relay.
Turns off DHCP relay.
Set DHCP server IP address
where the DHCP request will
forward to
<vid>: VLAN
< primary-server >: IP address for
primary server
< secondary-server >: IP address
for secondary server
Maximum 32 entries can be
configured.
Default: (empty list)
DHCP relay mode, auto/both
Turns on the DHCP relay agent
information (Option 82) feature.
Turns off the DHCP relay agent
information (Option 82) feature.
Adds the specified information for
the relay agent.
Turns on option 82 sub-option 2
Turns off option 82 sub-option 2
Adds the specified information for
sub-option 2
delete an acl profile
P
H/H
H/H
H/H
L/L
H/H
H/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
281