Chapter 55 Adsl Commands; Adsl Commands; Adsl Show Command; Adsl Enable Command - ZyXEL Communications IES-1248-51 User Manual

This chapter describes some of the ADSL commands that allow you to configure and monitor
the ADSL ports.

55.1 ADSL Commands

Use these commands to configure the ADSL ports. See
background information on ADSL.

55.1.1 ADSL Show Command

Syntax:
ras> adsl show [portlist]
where
[portlist]
This command shows the activation status, ADSL mode, maximum upstream and downstream
rate settings, profile and name of each ADSL port.
The following example displays information on ADSL port 5.

Figure 225 ADSL Show Command Example

ras> adsl show 5
port enable mode
---- ------ -------- ------------- ---------------- ----------------
5 -

55.1.2 ADSL Enable Command

Syntax:
ras> adsl enable <portlist>

Chapter 55 ADSL Commands

ADSL Commands
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
up/downstream profile
auto 512/ 2048 DEFVAL
IES-1248-51/51A/53 User's Guide
C
H A P T E R
Chapter 16 on page 119
name
-
5 5
for
363