ZyXEL Communications IES-1248-51 User Manual page 283

Table 92 Commands (continued)
CLASS COMMAND
acl set
acl show
dhcpsnoop disable
dhcpsnoop enable
dhcpsnoop flush
dhcpsnoop show
dscp show
dscp enable
dscp disable
dscp map show
dscp map set
vlan show
vlan portshow
vlan set
vlan enable
vlan disable
vlan delete
vlan pvid
vlan priority
vlan gvrp
Chapter 44 Commands
PARAMETERS
<portlist> <vpi>
<vci> <profile>
[portlist] [<vpi>
<vci>]
< portlist >
< portlist >
< portlist >
<portlist>
< portlist >
< portlist >
<srccp> <mappri>
<srccp>: source
code point, 0~63,
example:
1,3~5,10~15
<mappri> :
mapping priority,
0~7
<vlanlist>
[portlist]
<vid>
<portlist>:<F<T|U>
|X|N> [<portlist>:
<F<T|U>|X|N> ...]
[name]
<vid>
<vid>
<vlanlist>
<portlist> <pvid>
<portlist>
<priority>
<portlist>
<enable|disable>
IES-1248-51/51A/53 User's Guide
DESCRIPTION
Apply an acl profile to a PVC
Max. 8 profiles per port
Show acl profile setting for a PVC
Disable ip spoofing for a port
Enable ip spoofing for a port
Flush DHCP snooping table for a
port
Displaying per port DSCP setting
Enable ADSL/ENET ports to use
DSCP mapping
Disable ADSL/ENET ports to use
DSCP mapping
Displaying the DSCP code to
802.1p mapping table
Setting the DSCP code to 802.1p
mapping table
Displays VLAN settings.
Displays the port(s) VLAN
settings.
Configures a VLAN entry.
Turns on a VLAN entry.
Turns off a VLAN entry.
Removes a VLAN entry.
Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
Sets a port's default IEEE 802.1p
priority.
Set the port(s) to enable or disable
gvrp.
P
M/H
L/L
M/H
M/H
M/H
L/L
L/L
M/H
M/H
L/L
M/H
M/L
M/L
H/H
H/H
H/H
H/H
H/H
H/H
H/H
283