ZyXEL Communications IES-1248-51 User Manual page 280

IES-1248-51/51A/53 User's Guide
Table 92 Commands (continued)
CLASS COMMAND
igmpsnoop mvlan
enable
igmpsnoop mvlan
delete
igmpsnoop mvlan
group set
igmpsnoop mvlan
group delete
igmpsnoop mvlan
group show
igmpfilter set
igmpfilter show
igmpfilter profile
set
igmpfilter profile
delete
igmpfilter profile
show
queuemap show
queuemap set
garptimer show
garptimer join
garptimer leave
garptimer leaveall
rstp show
rstp enable
rstp disable
rstp priority
rstp hellotime
rstp maxage
rstp fwdelay
rstp port show
rstp port enable
280
PARAMETERS
<vid>
<vlanlist>
<vid> <index>
<start_mcast_ip>
<end_mcast_ip>
<vid> <index>
<vlanlist>
<portlist> <name>
[portlist]
<name> <index>
<startip> <endip>
<name>
[name]
<priority> <queue>
<join msec>
<leave msec>
<leaveall msec>
<priority>
<hellotime sec>
<maxage sec>
<fwdelay sec>
<portlist>
DESCRIPTION
Turns on a MVLAN entry.
Removes a MVLAN entry.
Create a multicast to VLAN
translation entry.
up to 16 entries
<index>: 1~16,
Note: IP address in each entry
should be disjointed
Delete a multicast to VLAN
translation entry.
Show a multicast to VLAN
translation entry.
Sets an ADSL port(s) to use an
IGMP filter profile.
Displays which IGMP filter profile
an ADSL port(s) is using.
Configures an IGMP filter profile.
Removes an IGMP filter profile.
Displays an IGMP filter profile's
settings.
Displays the system's priority level
to physical queue mapping.
Maps a priority level to a physical
queue.
Display the system's garp settings.
Set system's garp join time.
Set system's garp leave time.
Set system's garp leaveall time.
Display the system's rstp settings.
Turn system's rstp on.
Turn system's rstp off.
Set system rstp's priority.
Set system rstp's hello time.
Set system rstp's max age.
Set system rstp's forward delay
time.
Display enet port rstp status.
Set enet port to enable rstp.
Chapter 44 Commands
P
H/H
H/H
H/H
H/H
M/L
H/H
M/L
H/H
H/H
M/L
M/L
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/H
H/H
H/H
M/L
H/H