ZyXEL Communications IES-1248-51 User Manual page 271

Table 92 Commands (continued)
CLASS COMMAND
snmp trapdst set
snmp trapdst del
server show
server enable
server disable
server port
client show
client enable
client disable
client set
syslog show
syslog enable
syslog disable
syslog server
stdio show
stdio set
time show
time set
date show
date set
timeserver show
timeserver set
timeserver set
timeserver sync
log show
log clear
Chapter 44 Commands
PARAMETERS
<index> <ip>
[<port>]
<index>
<telnet|ftp|web|ic
mp>
<telnet|ftp|web|ic
mp>
<telnet|ftp|web|ic
mp>
<index>
<index>
<index> <start ip>
<end ip> [[telnet]
[ftp] [web] [icmp]]
<ip>
<minute|0:no
timeout>
<hh> [<mm> [ss]]
<yyyy mm dd>
<none>
<daytime|time|ntp>
<ip> <utc[<+|-
>0100~1200]>
[nosync]
IES-1248-51/51A/53 User's Guide
DESCRIPTION
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
Deletes the SNMP trap server
Displays the device's service
status and port numbers.
Turns on a service.
Turns off a service.
Sets a port for a service.
Displays the device's secured
client settings.
Sets a secured client set: a range
of IP addresses from which you
can manage the device and the
protocols that can be used.
Displays the syslog settings.
Turns on the syslog logging.
Turns off the syslog logging.
Sets the IP address of the syslog
server.
Displays Current Stdio Timeout.
Sets Current Stdio Timeout.
Displays the system's current time.
Sets the system's time.
Displays the system's current
date.
Sets the system's date.
Displays the system's time server.
Sets the system to not use a time
server.
Sets the time service protocol,
time server's IP address and the
device's time zone.
Retrieves the date and time from
the time server.
Displays the device's logs.
Clears the device's logs.
P
H/H
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
L/L
H/H
L/L
H/H
L/L
H/H
M/L
H/H
H/H
H/H
M/L
H/H
271