The following example sets ADSL port 9 to reject ARP, PPPoE and IGMP packets.
Figure 203 Packet Filter Set Command Example
ras> switch pktfilter set 9 arp pppoe igmp
51.1.3 Packet Filter PPPoE Only Command
Syntax:
ras> switch pktfilter pppoeonly <portlist>
This command sets the IES-1248 to allow only PPPoE traffic on the specified ADSL port(s).
The system will drop any non-PPPoE packets.
The following example sets ADSL port 1 to accept only PPPoE packets.
Figure 204 Packet Filter PPPoE Only Command Example
ras> switch pktfilter pppoeonly 1
Chapter 51 Packet Filter Commands
IES-1248-51/51A/53 User's Guide
345