Pvc Set Command - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
where
<portlist>
[<vpi> <vci>]
This command allows you to display the PVC parameters of the specified ADSL port(s) or all
of the ADSL ports if you do not specify any.

56.3.2 PVC Set Command

Syntax:
ras> adsl pvc set <portlist> <vpi> <vci> <super |vid = 1..4094 <priority>>
<DS vcprofile[,US vcprofile]>
where
<portlist>
<vpi>
<vci>
<super |vid
<priority>
DS vcprofile
402
You can specify a single ADSL port <1>, all ADSL ports <*> or a list of
=
ADSL ports <1,3,5>. You can also include a range of ports <1,5,6~10>.
The VPI and VCI of an individual PVC.
=
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
The VPI setting can be 0 to 255.
=
The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to 65535
=
if the vpi is not 0.
Enable the super channel option to allow a channel forward
=
frames belonging to multiple VLAN groups (that are not
assigned to other channels). The IES-1248 forwards frames
belonging to VLAN groups that are not assigned to specific
channels to the super channel. The super channel functions in
the same way as the channel in a single channel environment.
One port can have only one super channel.
The default VID (1 to 4094). Each PVC must have a unique
VID since the IES-1248 forwards traffic back to the subscribers
based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the IES-1248 forwards traffic back to
the subscribers based on the VLAN ID).
This is the priority value (0 to 7) to add to incoming frames
=
without a (IEEE 802.1p) priority tag.
Assign a VC profile to use for this channel's downstream traffic
=
shaping.
Chapter 56 Virtual Channel Management