IES-1248-51/51A/53 User's Guide
47.2.1 Option 82 Sub-option 1 Enable Command
Syntax:
ras> switch dhcprelay option82 enable
This command turns on the DHCP relay agent information (Option 82 Sub-option 1) feature.
47.2.2 Option 82 Sub-option 1 Disable Command
Syntax:
ras> switch dhcprelay option82 disable
This command turns off the DHCP relay agent information (Option 82, Sub-option 1) feature.
47.2.3 Option 82 Sub-option 1 Set Command
Syntax:
ras> switch dhcprelay option82 set [<relay info>]
where
[<relay info>]
This command adds the specified information for the relay agent.
47.3 DHCP Relay Option 82 (Agent Information) Sub-option 2
(Remote ID)
Use the following commands to configure the DHCP relay Option 82 (agent information)
feature, sub-option 2. This feature applies regardless of whether or not the DHCP relay is on.
47.3.1 Option 82 Sub-option 2 Enable Command
Syntax:
ras> switch dhcprelay opt82sub2 enable
308
Up to 23 ASCII characters of additional information for the
=
IES-1248 to add to the DHCP requests that it relays to a DHCP
server.
Examples of information you could add would be the name of
the IES-1248 or the ISP.
Chapter 47 DHCP Commands