Acl Assignment Commands; Acl Assignment Set Command; Figure 302 Acl Profile Show Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
where
<name>
This command lists the names of every ACL profile or displays the detailed settings of the
specified ACL profile.

Figure 302 ACL Profile Show Command Example

ras> switch acl profile show test
profile test:
rule:
vlan
priority:2
action:
rpri
rate

57.2 ACL Assignment Commands

Use these commands to apply ACL profiles to PVCs.

57.2.1 ACL Assignment Set Command

Syntax:
ras> switch acl set <portlist> <vpi> <vci> <profile>
where
<portlist>
<vpi>
<vci>
<profile>
This command allows you to apply an ACL profile to the specified port(s). You can apply up
to eight profiles to a subscriber port.
The following example applies the ACL profile "test" to a PVC.
428
The name of the ACL profile.
=
:10
:7
:1000
The port number of the PVC. You can specify a single ADSL
=
port <1>, all ADSL ports <*> or a list of ADSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
The VPI of the PVC.
=
The VCI of the PVC.
=
The name of the ACL profile.
=
Chapter 57 ACL Commands