An example is shown next.
Figure 145 Info Show Example
ras> sys info show
Hostname:
Location:
ZyNOS version: V3.52(ABR.0) | 05/11/2006
F/W size: 2756752
MAC address: 00:13:49:92:14:06
System up time:
Bootbase version: VABR1.01 | 03/07/2006
F/W build date: May 11 2006 10:40:48
DSP code version:
Hardware version: AB
Serial number: 0Z0615000022
45.4 Isolation Commands
Turn on port isolation to block communications between subscriber ports. When you enable
port isolation, you do not need to configure the VLAN to isolate subscribers.
45.4.1 Isolation Show Command
Syntax:
ras> switch isolation show
This command displays the current setting of the subscriber isolation feature.
An example is shown next.
Figure 146 Isolation Show Example
ras> switch isolation show
system isolation: enabled
45.4.2 Isolation Enable Command
Syntax:
ras> switch isolation enable
This command turns on the subscriber isolation feature.
Chapter 45 Command Examples
Contact:
Model: IES1248-53
7(days) :
6.04.0003
IES-1248-51/51A/53 User's Guide
7:36:30
293