55.3.3 Alarm Profile Delete Command
Syntax:
ras> adsl alarmprofile delete <profile>
where
<profile>
This command allows you to delete an individual ADSL alarm profile by its name. You cannot
delete the DEFVAL alarm profile.
The following example deletes the
Figure 266 Alarm Profile Delete Command Example
ras> adsl alarm profile delete SESalarm
55.3.4 Alarm Profile Map Command
Syntax:
ras> adsl alarmprofile map <portlist> <profile>
where
<portlist>
<profile>
Sets the IES-1248 to use an (already-configured) alarm profile with the specified ADSL ports.
The following example sets the IES-1248 to use the
5.
Figure 267 Alarm Profile Map Command Example
ras> adsl alarmprofile map SESalarm 5
55.3.5 Alarm Profile Showmap Command
Syntax:
ras> adsl alarmprofile showmap [profile]
Chapter 55 ADSL Commands
The name of an alarm profile.
=
alarm profile.
SESalarm
You can specify a single ADSL port <1>, all ADSL ports <*> or a list of
=
ADSL ports <1,3,5>. You can also include a range of ports <1,5,6~10>.
The name of an alarm profile.
=
IES-1248-51/51A/53 User's Guide
alarm profile with ADSL port
SESalarm
397