Igmp Count Limit Commands; Igmp Count Disable Command; Figure 190 Igmp Bandwidth Port Show Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
where
<portlist>
This command displays the multicast bandwidth setting on the specified port(s) and whether
or not this setting is active. The following example displays the bandwidth budget for port 1.

Figure 190 IGMP Bandwidth Port Show Command Example

ras> switch igmpsnoop bandwidth port show 1
port enable
------ ------ -----------
1

50.6 IGMP Count Limit Commands

Use these commands to limit the number of IGMP groups a subscriber on a port can join. This
allows you to control the distribution of multicast services (such as content information
distribution) based on service plans and types of subscription.
IGMP count is useful for ensuring the service quality of high bandwidth services like video or
Internet Protocol television (IPTV). IGMP count can limit how many channels (IGMP groups)
the subscriber connected to a DSL port can use at a time. If each channel requires 4~5 Mbps of
download bandwidth, and the subscriber's connection supports 11 Mbps, you can use IGMP
count to limit the subscriber to using just 2 channels at a time. This also effectively limits the
subscriber to using only two IPTVs with the DSL connection.

50.6.1 IGMP Count Disable Command

Syntax:
ras> switch igmpsnoop igmpcount disable <portlist>
where
<portlist>
This command turns off the IGMP count limit for the specified ADSL port(s).
The following command turns off the IGMP count limit for port 4.
334
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
bandwidth
- 4096
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
Chapter 50 IGMP Commands