Figure 265 Alarm Profile Set Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
<atuc ess>
<atur ess>
<atuc fast
rateup> <atur
fast rateup>
<atuc
interleave
rateup> <atur
interleave
rateup>
<atuc fast
ratedown> <atur
fast ratedown>
<atuc
interleave
ratedown> <atur
interleave
ratedown>
<init fail
enable>
<atuc fail
fast>
<atuc ses>
<atur ses>
<atuc uas>
<atur uas>
This command configures settings and thresholds that define when the IES-1248 is to send an
alarm trap and generate a syslog entry.
Configure alarm profiles first and then use the
1248 to use them with specific ADSL ports.
The following example sets an alarm profile named
alarm trap and generate a syslog whenever the upstream connection's number of severely
errored seconds exceeds three within a 15 minute period.

Figure 265 Alarm Profile Set Command Example

ras> adsl alarmprofile set SESalarm 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 3
0 0 0
396
The number of Errored Seconds that are permitted to occur
=
within 15 minutes.
A rate in kilobits per second (kbps). If a fast mode connection's
=
upstream transmission rate increases by more than this number,
then a trap is sent.
A rate in kilobits per second (kbps). If an interleave mode
=
connection's upstream transmission rate increases by more than
this number, then a trap is sent.
A rate in kilobits per second (kbps). If a fast mode connection's
=
downstream transmission rate decreases by more than this
number, then a trap is sent.
A rate in kilobits per second (kbps). If an interleave mode
=
connection's upstream transmission rate decreases by more than
this number, then a trap is sent.
"1" sets the profile to trigger an alarm for an initialization
=
failures trap. "2" sets the profile to not trigger an alarm for an
initialization failures trap.
The number of failed fast retrains that are permitted to occur
=
within 15 minutes.
The number of Severely Errored Seconds that are permitted to
=
occur within 15 minutes.
The number of UnAvailable Seconds that are permitted to occur
=
within 15 minutes.
alarmprofile map
command to set the IES-
that has the IES-1248 send an
SESalarm
Chapter 55 ADSL Commands