Adsl Downstream Carrier1 Command; Figure 238 Adsl Downstream Carrier0 Command Example 1; Figure 239 Adsl Downstream Carrier0 Command Display Example; Figure 240 Adsl Downstream Carrier0 Command Example 2 - ZyXEL Communications IES-1248-51 User Manual

<m5>
<m6>
<m7>
The hexadecimal digit is converted to binary and a '1' masks (disables) the corresponding tone.
Disabling a carrier tone turns it off so the system does not send data on it.
This command displays or sets masks for downstream carrier tones from 33 to 255. Masking a
carrier tone disables the use of that tone on the specified ADSL port. The most significant bit
defines the lowest tone number in a mask.
The following example disables downstream carrier tone 71 for ADSL port 5.

Figure 238 ADSL Downstream Carrier0 Command Example 1

ras> adsl dscarrier0 5 0 01000000 0 0 0 0 0
The following example displays the results.

Figure 239 ADSL Downstream Carrier0 Command Display Example

ras> adsl dscarrier0 5
port
---- |--------|--------|--------|--------|--------|--------|--------|
5 00000000 01000000 00000000 00000000 00000000 00000000 00000000
Tone:
m1:32-63, m2:64-95, m3:96-127, m4:128-159
m5:160-191, m6:192-223, m7:224-255
This example disables downstream carrier tones 70 and 71 for ADSL port 5.

Figure 240 ADSL Downstream Carrier0 Command Example 2

ras> adsl dscarrier0 5 0 03000000 0 0 0 0 0

55.1.15 ADSL Downstream Carrier1 Command

Syntax:
ras> adsl dscarrier1 <port number> [<m0> <m1> <m2> <m3> <m4> <m5> <m6> <m7>]
Chapter 55 ADSL Commands
tones 160~191
=
tones 192~223
=
tones 224~255
=
m1 m2 m3
IES-1248-51/51A/53 User's Guide
ds carrier
m4 m5 m6 m7
373