IES-1248-51/51A/53 User's Guide
where
<vid>
This command deactivates the specified multicast VLAN. The following example disables
multicast VLAN 12.
Figure 199 Multicast VLAN Disable Command Example
ras> switch igmpsnoop mvlan disable 12
50.8.4 Multicast VLAN Enable Command
Syntax:
ras> switch igmpsnoop mvlan enable <vid>
where
<vid>
This command activates the specified multicast VLAN.
50.8.5 Multicast VLAN Show Command
Syntax:
ras> switch igmpsnoop mvlan show <vlanlist>
where
<vlanlist>
This command displays the current multicast VLAN settings. In the state column, "-" indicates
the multicast VLAN is not active while "V" indicates the multicast VLAN is active.
Figure 200 Multicast VLAN Show Command Example
ras> switch igmpsnoop mvlan show 1
vid name
---- ---------------- ----------------------------------------
340
The multicast VLAN ID [1 – 4094].
=
The multicast VLAN ID [1 – 4094].
=
You can specify a single VLAN: <1>, all VLAN: <*>, a list of
=
VLAN: <1,3>, you can also include a range of VLAN:
<1,5,6~10>.
F:fixed X:forbidden
U:untag T:tag
Chapter 50 IGMP Commands