IES-1248-51/51A/53 User's Guide
<endip>
This command configures an IGMP filter profile.
The following example configures an IGMP filter profile named voice with a range of
multicast IP addresses (index 1) from 224.1.1.10 to 224.1.1.44.
Figure 187 IGMP Filter Profile Set Command Example
ras> switch igmpfilter profile set test1 1 224.1.1.10 224.1.1.44
50.3.4 IGMP Filter Profile Delete Command
Syntax:
ras> switch igmpfilter profile delete <name>
where
<name>
This command removes an IGMP filter profile.
The following example removes the voice IGMP filter profile.
Figure 188 IGMP Filter Profile Delete Command Example
ras> switch igmpfilter profile delete voice
50.3.5 IGMP Filter Profile Show Command
Syntax:
ras> switch igmpfilter profile show [<name>|*]
where
[<name>|*]
This command displays an IGMP filter profile's settings.
330
Type the ending multicast IP address for a range of IP addresses
=
that you want to belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both
the Start IP and End IP fields.
The name of an IGMP filter profile.
=
The name of an IGMP filter profile or all of the IGMP filter
=
profiles <*>.
Chapter 50 IGMP Commands