Igmp Count Enable Command; Igmp Count Set Command; Figure 191 Igmp Count Disable Command Example; Figure 192 Igmp Count Enable Command Example - ZyXEL Communications IES-1248-51 User Manual

Figure 191 IGMP Count Disable Command Example

ras> switch igmpsnoop igmpcount disable 4

50.6.2 IGMP Count Enable Command

Syntax:
ras> switch igmpsnoop igmpcount enable <portlist>
where
<portlist>
This command turns on the IGMP count limit for the specified ADSL port(s).
The following command turns on the IGMP count limit for port 4.

Figure 192 IGMP Count Enable Command Example

ras> switch igmpsnoop igmpcount enable 4

50.6.3 IGMP Count Set Command

Syntax:
ras> switch igmpsnoop igmpcount set <portlist> <count>
where
<portlist>
<count>
This command sets the IGMP count limit for the specified ADSL port(s).
The following command sets a IGMP count limit of 2 for port 4.
Chapter 50 IGMP Commands
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
0..16; the maximum number of IGMP groups subscribers on the
=
specified port(s) can join.
IES-1248-51/51A/53 User's Guide
335