Rpvc Gateway Delete Command; Rpvc Set Command; Figure 283 Rpvc Gateway Show Command Example; Figure 284 Rpvc Gateway Delete Command Example - ZyXEL Communications IES-1248-51 User Manual

The following is an example.

Figure 283 RPVC Gateway Show Command Example

ras> adsl rpvc gateway show
gateway ip
--------------- ----
192.168.10.102

56.7.4 RPVC Gateway Delete Command

Syntax:
ras> adsl rpvc gateway delete <gateway ip>
where
<gateway ip>
This command removes a gateway IP address that the device was set to use for 2684 routed
mode traffic.
The following example has the device remove a 2684 routed mode traffic gateway entry for IP
address 192.168.10.102.

Figure 284 RPVC Gateway Delete Command Example

ras> adsl rpvc gateway delete 192.168.10.102

56.7.5 RPVC Set Command

Syntax:
ras> adsl rpvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]>
<ip>/<netmask> <gateway ip>
where
<portlist>
<vpi>
<vci>
Chapter 56 Virtual Channel Management
vid
1
The IP address of the gateway to which you no longer want the
=
device to send the traffic that the system receives from this
PVC. Enter the IP address in dotted decimal notation.
The port(s) of the RPVC.
=
You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
The VPI of the RPVC.
=
The VCI of the RPVC.
=
IES-1248-51/51A/53 User's Guide
411