Virtual Channel Management
This chapter shows you how to use commands to configure virtual channels.
56.1 Virtual Channel Management Overview
See
Chapter 16 on page 119
56.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
56.2.1 Show Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile show [vcprofile]
where
[vcprofile]
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
56.2.2 Set Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
where
<vcprofile>
<vc|llc>
Chapter 56 Virtual Channel Management
C
H A P T E R
for background information on virtual channels and ATM QoS.
The name of the virtual channel profile (up to 31 ASCII characters).
=
The name of the virtual channel profile (up to 31 ASCII
=
characters). You cannot change the DEFVAL or DEFVAL_VC
profiles.
The type of encapsulation (vc or llc).
=
IES-1248-51/51A/53 User's Guide
5 6
399