ZyXEL Communications IES-1248-51 User Manual page 284

IES-1248-51/51A/53 User's Guide
Table 92 Commands (continued)
CLASS COMMAND
vlan frametype
vlan cpu show
vlan cpu set
mac flush
mac agingtime show
mac agingtime set
mac antispoofing
show
mac antispoofing
enable
mac antispoofing
disable
mac count show
mac count enable
mac count disable
mac count set
mac filter show
mac filter enable
mac filter disable
mac filter mode
mac filter set
mac filter delete
pktfilter show
pktfilter set
pktfilter pppoeonly pppoeonly
dot1x show
dot1x enable
284
PARAMETERS
<portlist>
<all|tag>
<vid>
<sec,
10..10000|0:disabl
ed>
[portlist]
<portlist>
<portlist>
<portlist> <count>
[portlist]
[portlist]
[portlist]
<port>
<accept|deny>
<port> <mac> [<mac>
<mac> ...]
<port> <mac> [<mac>
<mac> ...]
[portlist]
set <portlist>
<filter>
<portlist>
[portlist]
DESCRIPTION
Sets the specified DSL port to
accept tagged, untagged or
Ethernet frames (or both).
Note: enet1, enet2 are fixed at 'all'.
Displays the VLAN ID of the
Management VLAN.
Sets the VLAN ID of the
Management VLAN.
Clears learned MAC addresses
from the forwarding table.
Displays the MAC aging out time
period.
Sets the MAC aging out time
period.
Show the MAC antispoofing status
Turns on the MAC antispoofing
Turns off the MAC antispoofing
Displays the system's current
MAC address count settings.
Turns on the MAC address count
filter for an ADSL port(s).
Turns off the MAC address count
filter for an ADSL port(s).
Sets the MAC address count filter
for an ADSL port(s).
Displays MAC filter settings.
Turns on the MAC filter.
Turns off the MAC filter.
Sets the MAC filter to accept or
deny.
Adds a MAC filter MAC entry on
an ADSL port(s).
Removes a MAC filter MAC entry
on an ADSL port(s).
Display packet filter settings.
Set packet filter for port
Set packet filter to pppoe only for
port.
Display dot1x settings.
Turn on dot1x.
Chapter 44 Commands
P
H/H
M/~
H/~
H/H
M/L
H/H
M/L
H/H
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H