This chapter covers Simple Network Management Protocol (SNMP) with the IES-1248.
54.1 SNMP Commands
Use these commands to configure SNMP settings. See
information about SNMP.
54.1.1 Get Community Command
Syntax:
ras> sys snmp getcommunity <community>
where
<community>
Enter this command with the community to set the password.
54.1.2 Set Community Command
Syntax:
ras> sys snmp setcommunity <community>
where
<community>
Enter this command with the community to set the password.
54.1.3 Trusted Host Set Command
Syntax:
ras> sys snmp trusthost <ip>
Chapter 54 SNMP
C
H A P T E R
The password for the incoming
=
from the management station.
The password for the incoming
=
management station.
IES-1248-51/51A/53 User's Guide
SNMP
Chapter 37 on page 237
- and
Get
GetNext
- requests from the
Set
5 4
for more
- requests
359