Acl Profile Delete Command; Acl Profile Show Map Command; Acl Profile Show Command; Figure 300 Acl Profile Set Command Example - ZyXEL Communications IES-1248-51 User Manual

Figure 300 ACL Profile Set Command Example

ras> switch acl profile set test vlan 10 priority 2 rate 1000 rpri 7

57.1.2 ACL Profile Delete Command

Syntax:
ras> switch acl profile delete <name>
where
<name>
This command removes the specified ACL profile.
Note: You cannot remove the ACL profile(s) that is currently in use.

57.1.3 ACL Profile Show Map Command

Syntax:
ras> switch acl profile showmap <name>
where
<name>
This command displays the DSL port(s) to which the specified ACL profile is applied.
The following example displays the port mapping table for the

Figure 301 ACL Profile Show Map Command Example

ras> switch acl profile showmap test
profile: test
port type
---- ------ --- -----

57.1.4 ACL Profile Show Command

Syntax:
ras> switch acl profile show [<name>]
Chapter 57 ACL Commands
The name of the ACL profile.
=
The name of the ACL profile.
=
vpi vci
IES-1248-51/51A/53 User's Guide
ACL profile.
example
427