Adsl Name Command; Adsl Tel Command; Figure 231 Adsl Name Command Example; Figure 232 Adsl Tel Command Example - ZyXEL Communications IES-1248-51 User Manual

55.1.8 ADSL Name Command

Syntax:
ras> adsl name <portlist> <name>
where
<portlist>
<name>
This command sets the name of an ADSL port(s).
The following example sets ADSL port 5 to have the name super.

Figure 231 ADSL Name Command Example

ras> adsl name 5 super

55.1.9 ADSL Tel Command

Syntax:
ras> adsl tel <portlist> <tel>
where
<portlist>
<tel>
This command records the telephone number of an ADSL subscriber telephone number.
The following example records the telephone number 12345678 for ADSL port 5.

Figure 232 ADSL Tel Command Example

ras> adsl tel 5 12345678
Chapter 55 ADSL Commands
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
A descriptive name for the port. You can use up to 31 printable
=
ASCII characters (including spaces and hyphens).
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
An ADSL subscriber's telephone number. You can use up to 15
=
ASCII characters (including spaces and hyphens).
IES-1248-51/51A/53 User's Guide
369