ZyXEL Communications IES-1248-51 User Manual page 286

IES-1248-51/51A/53 User's Guide
Table 92 Commands (continued)
CLASS COMMAND
isolation disable
isolation
daisychain
isolation
standalone
ip
show
arp show
arp flush
set
gateway
route show
route set
route set
route delete
route flush
ping
statistics
monitor
adsl show
adsl linedata
adsl lineinfo
adsl lineperf
adsl linerate
adsl 15mperf
adsl 1dayperf
286
PARAMETERS
<ip>[/netmask]
<gateway ip>
<dst ip>[/netmask]
<gateway ip>
[metric] <name>
default <gateway
ip> <metric>
<dst ip>[/netmask]
<ip> [count]
[portlist]
<portlist>
<portlist>
<portlist>
<portlist>
<portlist> [count
<0..96>]
<portlist>
DESCRIPTION
Turns the subscriber isolation
feature off.
Displays the Management IP
address settings.
Displays the device's IP Address
Resolution Protocol(ARP) table.
Clears the device's IP Address
Resolution Protocol(ARP) table.
Sets the Management IP address
and subnet mask.
Sets the IP address of the device's
default gateway.
Displays the routing table.
Adds a routing table entry.
Sets the device's default route.
Removes a routing table entry.
Clears the routing table.
Pings a remote host.
Displays hardware monitor status.
Displays ADSL port connection
status.
Displays the line data load per
symbol (tone).
Displays the info of the specified
ADSL ports.
Displays the performance
statistics of the specified ADSL
port.
Displays the line rate.
Displays line performance
statistics for the current and
previous 15-minute periods.
Displays line performance
statistics for the current and
previous 24 hours.
Chapter 44 Commands
P
H/H
H/H
H/H
M/L
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/~
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L