2 Use the
Figure 169 Deleting Default VLAN Example
ras> switch vlan cpu set 3
48.4.9 VLAN Delete Command
Syntax:
ras> switch vlan delete <vlanlist>
where
<vlanlist>
This command deletes the specified VLAN ID entry from the static VLAN table. The
following example deletes entry 2 in the static VLAN table.
Figure 170 VLAN Delete Command Example
ras> switch vlan delete 2
48.5 VLAN Enable
Syntax:
ras> switch vlan enable <vid>
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
48.6 VLAN Disable
Syntax:
ras> switch vlan disable <vid>
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
Chapter 48 IEEE 802.1Q Tagged VLAN Commands
switch vlan1q vlan cpu
You can specify a single VID: <1>, all VIDs: <*>, a list of
=
VIDs: <1,3>, you can also include a range of VIDs: <1,5,6~10>.
IES-1248-51/51A/53 User's Guide
command to set VID 3 as the management VLAN.
319