Table of Contents
Advertisement
19.
Press [Change] for items you want to use as search conditions from the following: "Name".
You can enter an attribute as a typical search keyword. Using the entered attribute, the function
searches the LDAP server's Address Book.
20.
Press [OK].
21.
Press [Exit].
22.
Press the [User Tools] key.
Changing the LDAP server
This section describes how to change the programmed LDAP server.
1.
Press [System Settings].
2.
Press [Administrator Tools].
3.
Press [ Next] twice.
4.
Press [Program / Change / Delete LDAP Server].
5.
Check that [Program / Change] is selected.
6.
Select the LDAP server you want to change.
7.
Change the settings as necessary.
8.
Press [OK] after changing each item.
9.
Press [Exit].
10.
Press the [User Tools] key.
Deleting the LDAP server
This section describes how to delete the programmed LDAP server.
1.
Press [System Settings].
2.
Press [Administrator Tools].
3.
Press [ Next] twice.
4.
Press [Program / Change / Delete LDAP Server].
5.
Press [Delete].
6.
Select the LDAP server you want to delete.
7.
Press [Yes].
8.
Press [Exit].
9.
Press the [User Tools] key.
Programming the LDAP server
2
59
Advertisement
Table of Contents
