Step 14. Add Server To Domain (Optional) - Nortel Call Center Server Installation And Maintenance Manual

July 2007

Step 14. Add server to domain (optional)

Introduction
This step shows you how to add your Symposium Call Center Server to an
existing domain, and perform other necessary tasks to make your server work in
a domain. To perform this step, you need domain administrator's privileges, or
ask the domain administrator to assign you a domain user account for remote
access.
Standalone server
On a standalone server, you can add your server as a member of an existing
domain now. Follow the procedures in this step.
Coresident server
On a coresident server, note that TAPI 3.0 requires the server to be part of a
domain. See the following table on when you should add your coresident server
to an existing domain.
If your coresident server
includes
Symposium Call Center Server and
Symposium Web Client
Symposium Call Center Server,
Symposium Web Client, and TAPI
3.0
Add Symposium Call Center Server to your domain
Once you have completed installing Symposium Call Center Server, you can
add your server as a member of an existing domain (standalone only).
Installation and Maintenance Guide for Windows 2003
Installing the server software
then add the server to a domain
after installing Symposium Web
Client
after installing TAPI 3.0
217