Nortel Call Center Server Installation And Maintenance Manual page 342

Upgrading from Release 4.0 to 5.0 on the same server
4 Click Finish.
Result: The Symposium Call Center Server Setup Configuration Utility
window appears. It contains a tab for each of the windows in which you
entered information during the configuration. (It also contains a Utilities tab,
which you can use to import and export configuration data and to create a
Platform Recovery Disk.)
Note: Depending on your keycode, the following tabs may not appear:
M1/Nortel Communication Server 1000 or DMS/MSL Switch
Information
RSM IP Address (Note: You must configure RSM for a coresident
server. For instructions on configuring RSM, see Chapter 22, "Installing
and configuring Real-time Statistics Multicast.")
Voice Connection (Note: Although Symposium Call Center installs on a
server without a COM 2 serial port, the hardcoded dependency in the
MAS Access Link service can cause the Access Link Handler to restart
continuously if you do not configure the COM2 port. For a Symposium
Call Center Server that does not require the ACCESS Link connection
to Meridian Mail, enter a dummy IP address and port number in the
Voice Connection tab.)
Database Replication
342
Standard 7.02
Symposium Call Center Server