Step 14. Change The Ngendist And Ngendesign Passwords - Nortel Call Center Server Installation And Maintenance Manual

Upgrading from Release 4.2 to 5.0 on a new server
Step 14. Change the NGenDist and
NGenDesign passwords
Introduction
To protect your system from unauthorized access, change the passwords for the
Nortel user accounts as soon as you finish the installation.
NGenDist and NGenDesign are Windows remote access accounts that enable
the distributor or Nortel customer support to remotely log on to the server if
requested by the customer. These accounts are created during the server software
installation. To ensure server security, change the NGenDist and NGenDesign
passwords.
Assigning new passwords
Note: To assign new passwords, you do not need to know the default passwords
for NGenDist and NGenDesign. If you change the NGenSys password, you
must apply the same password change to the Meridian Application Server
(MAS) Backup/Restore service.
To change the NGenDist, NGenDesign, or NGenSys passwords
1 Log on to the server as Administrator.
Click Start ➝ Programs ➝ Administrative Tools ➝ Computer
2
Management.
Result: The Computer Management window appears.
3 Click Local users, and then click Users.
Result: The Computer Management window displays a list of available
user accounts, including NGenDist and NGenDesign.
4 Right-click NGenDist.
5 Click Set Password.
Result: The Properties window appears.
746
Standard 7.02
Symposium Call Center Server