Step 4. Connect Meridian Mail With A Serial Port - Nortel Call Center Server Installation And Maintenance Manual

July 2007
Step 4. Connect Meridian Mail with a serial
port
Introduction
If you are using Meridian Mail to provide voice processing or IVR services, you
must connect the server to Meridian Mail.
To connect Meridian Mail with a serial port
1 Plug the null modem adapter and RS-232 serial cable from the Meridian
Mail COM port into the COM2 port on the server.
2 When the operating system is installed, ensure that COM2 is set to 9600
bps.
Result: The connection to Meridian Mail is complete.
Note: For COM1, set the base I/O Port Address to 3F8 and the IRQ to 4.
Installation and Maintenance Guide for Windows 2003
Preparing the server for your installation
121