Step 6. Add An Smi System - Nortel Call Center Server Installation And Maintenance Manual

Installing the client software

Step 6. Add an SMI system

Introduction
Use the System management Interface (SMI) Workbench to add an SMI system
for each server to which you want to connect from the client PC. When you
double-click that system, the SMI Workbench initiates a connection to the
server. When the connection is established, the SMI window opens. The SMI
window contains programs for administering and monitoring Symposium Call
Center Server.
Using a dial-up connection to the server
Client PCs that are not on the same LAN as the server must use Dial-Up
Networking to establish a network connection. For information about using a
dial-up connection, refer to the Administrator's Guide.
Note: You cannot generate reports across a dial-up (PPP) connection.
To add an SMI system
From the Windows Start menu, choose Programs ➝ SMI Workbench.
1
Note: In Windows XP Professional, choose All Programs ➝ SMI
Workbench.
Result: The SMI Workbench window appears.
.
72
Standard 7.02
Symposium Call Center Server