Step 12. Add Ngen Names To Pcanywhere (Standalone) - Nortel Call Center Server Installation And Maintenance Manual

July 2007
Step 12. Add NGen names to pcAnywhere
(standalone)
Introduction
ATTENTION
To add NGenDist and NGenDesign to pcAnywhere 11.0.1
1 Log on to Windows as Administrator.
From the Windows Start menu, choose Programs ➝ Symantec
2
pcAnywhere.
3 On the pcAnwhere manager (left side), select the Hosts option.
Result: The Hosts option on the pcAnywhere manager pane is highlighted.
Click the File menu, and then choose New ➝ Item ➝ Advanced.
4
Note: Do not use the Wizard option.
Result: The Host Properties: New Host window appears.
Installation and Maintenance Guide for Windows 2003
If you are installing a coresident server, skip this step and
proceed to "Step 13. Verify the success of the installation" on
page 216. For remote support options for a coresident
server, see "Remote access support and coresidency," on
page 37 for details.
If your server computer is on a workgroup, complete this step.
If you intend on adding your server to a domain, see "Step 14.
Add server to domain (optional)" on page 217 for information
on configuring the NGen user groups for remote access in a
domain environment.
Installing the server software
213