Front Panel Controls; Adding A Front Panel Control; Adding Selections To A Selection List - Kyocera FS-6525MFP Operation Manual

8
9
10
11
12

Front Panel Controls

Adding a Front Panel Control

1
2
3
4

Adding Selections to a Selection List

1
2
3
File Management Utility
If on a network, in Send folder (Share name), enter the share name for
sending scan data, or click Browse and select the path to the share name
folder.
In Personal Computer (IP address or Host name), enter the IP address or
host name of the PC that sends scan data. You can enter a maximum of 39
ASCII characters.
In Login user name, enter the user name for SMB transfer, to a maximum of 64
characters. Then in Login password, enter the login password for the SMB
transfer, to a maximum of 64 characters.
Click Apply to save the workflow settings.
Click Close to return to the main screen.
Note: You need to set the front panel controls for some models.
You can create a custom workflow and assign it to a button that appears on the
operation panel. This feature allows a user to conveniently use a predefined set
of conditions and distribution paths for handling scanned documents. The
workflow guides the user to enter information that the application uses to
distribute the scanned document to the correct folder.
In Select type of control, select the type of control to display on the operation
panel.
In Select type of instruction, choose the prompt message.
In Enter title of control, enter the name of the control.
Click Add to add the control to List of controls.
If Select item is chosen for the type of control, you can set up a list of selections
that can be chosen at the operation panel. The items appear as buttons or
check boxes, depending on the model. These selections are matched to the
User defined criteria in Distribution settings.
In Create a selection, type a selection item.
Click Add. The item appears in the List of selections below.
You can change the order of items in the list by clicking on an item, then using
the up and down buttons to move it.
Workflow
4-2