Host-Route; Import-Route - 3Com 5500G-EI Command Reference Manual

host-route

Syntax
host-route
undo host-route
View
RIP view
Parameter
None
Description
Use the
default.
Use the
Example
To configure RIP to reject a host route, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]rip
[SW5500-rip]undo host-route

import-route

Syntax
import-route
]
undo import-route
View
RIP view
Parameters
protocol
following:
value
route-policy
match the conditions of the specified policy are imported.
Description
Use the
Use the
protocols. By default, RIP does not import any other protocol's route.
The
import-route
with a certain cost value. RIP regards the imported route as its own route and
command to configure RIP to accept host routes. This is the
host-route
command to configure RIP to reject host routes.
undo host-route
protocol [ cost
protocol
Enter the routing protocol to be imported. This can be one of the
, ,
direct ospf ospf-ase
Enter the cost value of the route to be imported.
route_policy_name
command to import the routes of other protocols into RIP.
import-route
undo import-route
command can be used to import the route of another protocol
RIP Configuration Commands
value | route-policy
, or
ospf-nssa static
Enter a route-policy name. Only routes that
command to cancel the import of routes from other
165
route-policy-name
.