Configuring Communications To A Simatic Control - Siemens SINAMICS G120 Operating Instructions Manual

● Create a PROFIBUS DP network.
A.3.1.2

Configuring communications to a SIMATIC control

The inverter can be connected to a SIMATIC control in two ways:
1. Using the inverter GSD
2. Using the STEP 7 object manager
The following section describes how to configure the inverter using the GSD.
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB
This somewhat more user-friendly method is only available for S7 controls and installed
Drive ES Basic (see Section Commissioning tools (Page 18)).
Appendix
A.3 Application examples
319