Siemens SINAMICS G120 Operating Instructions Manual page 244

Functions
9.10 Fail-safe function Safe Torque Off (STO)
Documents for the acceptance
The STARTER provides you with a number of documents to be regarded as a
recommendation for the acceptance tests of the safety functions.
Procedure
● In STARTER create the acceptance documentation.
●
●
● You load the created reports for archiving and the machine documentation for further
● Archive the acceptance reports and the machine documentation.
The reports and the machine documentation can also be found in the section:
Documentation for acceptance of safety functions (Page 337).
242
①
This template contains a recommendation for your machine or plant documentation.
Dokumentation_Maschine_G120x: German template.
Documentation_machine_G120x: English template.
②
Select the suitable template for the basic functions and create a report for each drive
of your machine or plant.
For firmware version V4.4 and higher:
Protokoll_de_G120x_Basic_V4.4+: German template.
Protocol_en_G120x_Basic_V4.4+: English template.
processing:
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB